As times goes on, the environmental problems we all are facing asks for a non-polluting solution. V.O.C. are guilty for the improvement of pollution in the air. Our waterborne products, both for indoor and for outdoor use, are the up-to-date solutions to safety and health problems. Formulated with the lowest V.O.C. contents, they give a very good result in terms of resistance, easy use and rheological properties.
Check our full range of Products by clicking on the Products Tab.
You can also download your preferred products' Technical Data sheet or contact our support department on: customersupport@egidiomilesi.com
Quick Line Description:
AQUAXIL WATERBORNE WOOD PRESERVATIVES FOR CONIFER
Aquaxil are suitable for all inside and outside timbers: chalets, wood houses, matchboards, under-roof coatings, window/door, frames, shutters, fences, gates etc. made of coniferous timber or timber without tannins or inhibitors as these could compromise flow leveling, color uniformity and damage the appearance of handicrafts.
IWB 2975 INTERMEDIATE WHITE SEALER WATERBASED
IWC 8000 AQUAXIL WATERBORNE 'M' CLEAR WOOD PRESERVATIVE
IWC 8001 AQUAXIL TEAK
IWC 8002 AQUAXIL GREEN WALNUT
IWC 8003 AQUAXIL MAHOGANY
IWC 8004 AQUAXIL DOUGLAS
IWC 8005 AQUAXIL GREEN
IWC 8006 AQUAXIL CHESTNUT
IWC 8007 AQUAXIL CHERRY
IWC 8008 AQUAXIL WALNUT
AQUAXIL’ WATERBORNE WOOD PRESERVATIVES FOR BROAD LEAF
These Aquaxil products are wood preservatives and decorative bases developed to protect wood from atmospheric agents, micro-organisms and fungi attack for a long time. Aquaxil are suitable for all inside and outside timbers: chalets, wood houses, matchboards, under-roof coatings, window/door, frames, shutters, fences, gates etc. made of broad leaf timber.
IWL 5000 'AQUAXIL' CLEAR
IWL 5001 'AQUAXIL' TEAK
IWL 5002 'AQUAXIL' GREEN WALNUT
IWL 5003 'AQUAXIL' MAHOGANY
IWL 5004 'AQUAXIL' DOUGLAS
IWL 5005 'AQUAXIL' GREEN
IWL 5006 'AQUAXIL' CHESTNUT
IWL 5007 'AQUAXIL' CHERRY
IWL 5008 'AQUAXIL' WALNUT
BASECOAT AND FINISHES FOR OUTDOORS
A product developed for the maintenance of frames previously coated by waterborne paints.
EM 2400 “AQUATOP” RUG APPLICATION
The below products are endowed with good transparence and sanding. It is used by spray application on wood already treated with solvent or waterborne preservatives. It has low solvent content and very good thixotropy. The presence in its formula of UV filters increases the outdoor resistance of the varnished piece.
FWC 2180 CLEAR WATERBORNE BASECOAT FOR OUTDOORS
This intermediate product is used by dipping application on wood already treated with waterborne preservatives. It doesn’t contain biocides.
FWE 2110 INTERMEDIATE WATERBORNE NEUTRAL BASECOAT
These are waterborne products endowed with high solid contents and have been developed for protection and decoration of wood. They preserve for a long time against weather , uv rays and blueing funga. Their special water-repellent and water-regulating treatment allows the wood to transpire naturally. These product avoids chalking, cracking and defoiling.
IWT 2800 “AQUATOP” NEUTRAL WATER-REPELLENT PRESERVATIVE
IWT 2811 “AQUATOP” LARCH WATER-REPELLENT PRESERVATIVE
IWT 2812 “AQUATOP” WALNUT WATER-REPELLENT PRESERVATIVE
These are waterborne high build topcoats endowed with high elasticity, transparency and resistance to weather conditions and to blocking. They have very low solvent contents and good thixotropy. The painted substrate has got soft feel and requires minimum maintenance. UV filters contained increases resistance to weather. They are available in 30% gloss level.
TWE 240/30 “AQUALOID” TIX CLEAR MATT FINISH
TWE 241/30 “AQUALOID” TIX WALNUT MATT FINISH
TWE 242/30 “AQUALOID” TIX LARCH MATT FINISH
This series is endowed with excellent features of elasticity, transparency, resistance to weather conditions and blocking. They have low solvent content.
TWE 270/30 “AQUALOID” TIX CLEAR 30% GLOSS
TWE 271/30 “AQUALOID” TIX WALNUT 30% GLOSS
TWE 272/30 “AQUALOID” TIX LARCH 30% GLOSS
This product is endowed with good transparence and sanding. It is used by spray application on wood already treated with solvent or waterborne preservatives. It has low solvent content and very good thixotropy. The presence in its formula of UV filters increases the outdoor resistance of the varnished piece.
TWE 295 “AQUALOID” CLEAR MATT FINISH BY BRUSH
TWE 296 “AQUALOID” CLEAR GLOSSY FINISH BY BRUSH
PIGMENTED VARNISHES FOR OUTDOORS
A product used as a sealer on pieces previously treated with solvent- or water-based primer (AQUAXIL or MILXIL series). It is endowed with great filling power, dries quickly, is easy to sand , has low solvent content and very vertical application. Developed with special resins, it ensures ideal protection from substances going out of timber.
FWE 2920 AQUAFOND WATERBORNE WHITE SEALER
Pigmented topcoat totally odourless. It is suitable for surfaces exposed to weather like windows, front doors and blinds which are defined as “dimensionally stable” . It is endowed with high elasticity, resistance to weather conditions and to blocking, low solvent contents, high thixotropy and hiding power. The covered substrate has got soft feel, scratch resistance and requires only a slight maintenance treatment as time goes by. It doesn’t contain biocides. Available in 30% gloss sheen.
TWE 287/30 AQUALOID WATERBASED WHITE MATT TOP FINISH
BASECOAT AND TOPCOAT FOR INTERIORS
An odorless waterborne basecoat. It is suitable as first coat on doors and furniture. It is used on items pre-stained water-based dyes that are resistant to water-based varnishes. With its high transparent finish, good drying abilities and hardness, EM 2161 bears comparison with conventional polyurethane. It is endowed with high thixotropy.
EM 2161 AQUAFOND CLEAR “V” BASECOAT FOR INTERIORS
A waterborne clear basecoat developed for the treatment of indoor furniture and doors. It is used as a basecoat on surfaces previously shaded by waterborne stains resistant to be coated by waterborne paints. It has excellent transparency, drying and hardness properties. It has a low content of solvents and an excellent vertical grip.
EM 2163 AQUAFOND 2K TRANSPARENT X INTERIORS
A waterborne clear topcoat developed for finishing treatment of indoor furniture and doors. It is used as a finishing coat over surfaces previously treated by EM 2163 or polyurethane clear basecoats. It is endowed with excellent transparency and wetability and its main features can be compared with a good polyurethane topcoat. It has a low solvent contents and good thixotropy.
EM 2260/30 AQUAPAC 2K CLEAR MATT TOP COAT X INTERIOR
It is a clear coatings which can be used as a basecoat and as well as topcoat. It is used on items pre-stained with solvent or water-based dyes that are resistant to water-based varnishes. It can be compared to a good PU varnish, being endowed with excellent transparency, fast drying time and good hardness.
EM 2270/20 WATERBORNE CLEAR BASE-TOPCOAT 'V' 20% GLOSS
A product that is endowed with excellent features of transparency, drying and hardness as much as to be compared to a good PU topcoat. It has low solvent contents and best thixotropy.
EM 2270/30 WATERBORNE CLEAR TOPCOAT 'V' 30% GLOSS
A product used as waterborne top coat, totally odorless, developed for interior use on items such as doors and furniture previously coated by a waterborne basecoat. It can be compared to a good PU varnish, being endowed with excellent transparency, good drying time and good hardness.
EM 2280/20 AQUAPAC CLEAR WB TOPCOAT FOR INTERIORS 20% GLOSS
Clear coatings which can be used as a basecoat and as well as topcoat. They are used on items pre-stained with solvent or water-based dyes that are resistant to water-based varnishes. They ca be compared to a good PU varnish, being endowed with excellent transparency, fast drying time and good hardness.
EM 2290/20 WATER-BASED MATT PRODUCT FOR INTERIOR USE
EM 2290/40 WATER-BASED MATT PRODUCT FOR INTERIOR USE
A waterborne topcoat developed for finishing treatment of indoor furniture and doors. It is used as a finishing coat over surfaces previously treated by EM 2905 or polyurethane clear basecoats. It is endowed with excellent transparency and wettability and its main features can be compared with a good polyurethane topcoat. It has a low solvent contents and good thixotropy.
EM 2710/20 AQUALACK 2K WHITE MATT TOP COAT FOR INTERIORS
A product used as a finish on items coated with a water-soluble primer or high-solid content polyurethane primer
EM 2712 AQUALACK WHITE FINISH 25% GLOSS
It is a white waterborne basecoat developed to lacquer indoor furniture and doors. It is used on surfaces, even previously treated by solvent based primers. It is endowed with excellent hiding power, wettability, fast drying time and hardness and can be compared with a good polyurethane basecoat. It has low solvent contents and good thixotropy.
EM 2905 AQUAFOND 2K WHITE BASECOAT
A product used on several substrates, even previously coated with solvent based sealers. It is endowed with top features of coverage, wetting and drying time and a hardness similar to a traditional PU basecoat. It has low solvent content.
EM 2912 AQUAFOND WHITE BASECOAT
WATERBORNE CONCENTRATES
They are suitable to shade wood preservatives and clear finishes for outdoors.
EM 1600 GRAIN CONCENTRATE
EM 1601 LARCH CONCENTRATE
EM 1602 WALNUT CONCENTRATE
EM 1603 MAHOGANY CONCENTRATE
EM 1604 GREEN CONCENTRATE
ADDITIVES FOR WATERBORNE PRODUCTS
EM 10051 FLOW-COATING NO FOAM
EM 10052 BINDER NO TANNIN
EM 10071 CLEANER FOR WINDOW FRAMES
EM 10090 HARDNESS IMPROVER
'AQUAXIL' ECONOMIC WATERBORNE WOOD PRESERVATIVES FOR CONIFER
This Aquaxil series with cheap price, are suitable for all inside and outside timbers: chalets, wood houses, matchboards, under-roof coatings, window/door, frames, shutters, fences, gates etc. made of coniferous timber or timber without tannins or inhibitors as these could compromise flow leveling, color uniformity and damage the appearance of handicrafts.
IWC 6000 'AQUAXIL' 'C' CLEAR
IWC 6002 'AQUAXIL' 'C' GREEN WALNUT
IWC 6004 'AQUAXIL' 'C' DOUGLAS
IWC 6006 'AQUAXIL' 'C' CHESTNUT
IWC 6008 'AQUAXIL' 'C' WALNUT
