POLYESTER WORKING CYCLE PRODUCTS
This set of products is indicated to finish surfaces wherever very high coverage is required, both clear and pigmented. U.V. curing varnishes are the right answer to reduce environmental pollution.
Check our full range of Products by clicking on the Products Tab.
You can also download your preferred products' Technical Data sheet or contact our support department on: customersupport@egidiomilesi.com
Quick Line Description:
PU SEALERS FOR POLYESTERS
EM 850 'POLIFOND' STANDARD SEALER.
Clear sealer for sealing treatment of wooden or M.D.F. substrates before application of PE basecoat.
EM 853 'POLIFOND' SPECIAL SEALER FAST-DRYING
Formulated as sealer for tropical timbers, like rosewood, mansonia etc. It must be used before the polyester coat.
EM 858 ‘POLIFOND’ SEALER FOR MDF
Special sealer for MDF, endowed with excellent coverage, fast drying and easy sanding.
PRIMERS FOR NON WOODEN SUBSTRATES
Primers for paper, laminated substrate or melamine papers. They are used as adhesion promoters. For the following coats, basecoat and top coat, polyurethane, nitrocellulosic or polyester based.
EM 854 ADHESION PROMOTER FOR SPRAY APPLICATION
EM 855 ADHESION PROMOTER FOR ROLLER APPLICATION
BASECOATS AND FINISHES POLYESTERS BY REDOX CURING
EM 812 WHITE PE WAX-FREE BASECOAT
High coverage and very easy sanding give this basecoat particularly suitable for porous substrates, like chip-board and MDF. It can be applied by spray and it is indicated for flat panels and edges.
EM 818 WHITE PE BASECOAT
White PE basecoat with high coverage, good flow levelling and easy sanding. It is endowed for porous substrates like chip-board and MDF.
EM 834 CLEAR PE WAX -FREE BASECOAT HIGH COVERAGE
Particularly suitable as basecoat treatment for coffins , due to its thixotropy. It is endowed with good coverage and easy sanding.
EM 835 CLEAR PE WAX-FREE BASECOAT HIGH COVERAGE
It is endowed with extremely high coverage, transparence, easy sanding and good thixotropy. It is suitable whenever very high coverage is required and for fast working cycles.
EM 843 CLEAR PE WAX-FREE THIXOTROPIC BASECOAT
It is a clear PE basecoat endowed with high coverage, good thixotropy and very easy to sand. It’s suitable to paint coffins and frames.
EM 891 'POLIBRILL' VERTICAL CLEAR DIRECT GLOSSY FINISH
Direct glossy PE finish, suitable in clear glossy cycle by spray in vertical application. Endowed with very high transparency and extraordinary surface hardness, it can be applied on several substrates, to finish flat surfaces or chairs, turnery and coffins.
